High Power

DIN 41612 / IEC 60603-2 Connector Product introduction The variety of different types and termination technologies (press-fit, dip soldering, manual soldering, wrapping, crimping, THR) for DIN connectors cover a wide range of applications. Eurocard Connectors per DIN 41612 and IEC 60603-2 Features Various termination technologies possible Leading and lagging contacts Pre-centering Variety of termination lengths A range of accessories, such as shrouds, board locks, coding keys Quick lock switch...

DFS-XX-XXX-D03 DIN41612 Vertical Female F Type High Power Connectors 48 Positions(Plastic High) Product introduction The DIN41612 connector is classified according to the standard of the connector. There are two different IEC standards that can be used, namely IEC 60-603 and IEC 61 076-4 113. Each provides slightly different test conditions, but in both cases, Class 1 or Level 1 provide the highest quality and reliability. They are obviously are more expensive, and this is mainly as a result of...

Product introduction DIN 41612 Female Connectors, The DIN 41612/IEC 60603-2 connector family consists of 13 basic sizes and many complementary versions. It was developed for use in 19" rack systems in accordance with DIN 41494/IEC 60297. The large number of different sizes and the efficient connection techniques have made it possible to install these connectors for in extremely wide range of applications. Connection between plug-in card and back-panel wiring Connection between two PCB´s...

DIN41612 Vertical Female E Type High Power Connectors 48 Positions Product introduction the products are used in the connection between the backplane and the daughter board of optoelectronic equipment, the connection between the backplane and the daughter board of industrial control equipment, the industrial control of consumer electronics, the connection between the backplane and the daughter board of industrial control security control, etc. Its application industry: used in consumer...

DIN41612 Vertical Female E Type High Power Connectors 48 Positions Product introduction To aid construction of motherboards and the like, the female DIN 41612 connectors have press fit contacts options available rather than solder pin contacts. This helps avoid thermal shock to the backplane during manufacture. There are several different types of DIN 41612 connector that are referred to within the data sheets. These include Types B, C, D, F, M, Q and R. There are also the standard DIN sizes as...

DIN41612 Vertical Female E Type High Power Connectors 48 Positions Product introduction Classification Classified by working current Ordinary type (2A), high current type (6A), power type (15A). Classified by Termination Form Soldering type, crimping type, crimping terminal type, IDC piercing insulation type. When the technological level reaches a high level, it is recommended to use a harpoon, and a screw fixing method is recommended at this stage. When the European connector has insulation...

Product introduction DIN41612-High current range DIN 41612 connectors for interconnection in all 19in Eurocard racking systems. Connectors are compatible with RS 19in sub-rack systems. Typical applications include telecommunications, data communications, measurement and control. Connection between plug-in cards at right angle to backplane wiring. Connection between two parallel PCB's arranged one above the other. For front or rear I/O. DIN41612 Right Plug H15 Type High Power Connectors 15...

DIN41612 Right Plug F Type High Power Connectors 48 Positions Product introduction DIN41612 connectors mainly have parallel connection and vertical connection. The connection form is: straight hole - curved needle, vertical connection of curved hole - straight needle, parallel connection of curved hole - curved needle. The number of contact points are: 20, 30, 32, 40, 64, 96, 120, 128, 160, etc. There are 2A, 6A, 15A, etc., signal type, power type and mixed type of different media, the product...

DIN41612 Right Plug F Type High Power Connectors 48 Positions Product introduction DIN 41612 connectors are used in Pancon STEbus, Futurebus, VMEbus, Multibus II, NuBus, VXI Bus,eurocard TRAM motherboards,and Europe Card Bus, all of which typically use male DIN 41612 connectors on Eurocards plugged into female DIN 41612 on the backplane in a 19-inch rack chassis. The DIN 41612 connector finds particular applications in systems that have an open architecture where cards, modules and rack systems...

Button battery holder Used to load button battery, generally soldered on PCB board, convenient for button battery powered module clock or other consumer electronic products. Installation method There are two installation methods for the button battery holder, one is the plug-in type, and the other is the patch type. Coin Cell Holder for CR2032 1. MATERIAL: a. HOUSI b. CONTACT: PHOSPHOR BRONZE (SURFACE PLATING: Sn 100u"-120U") 2. ELECTRIC: a. CONTACT RESISTANCE: 30 mΩ MAX b. INSULATION...